CUT EXPENSES. CUT TIME. CUT COSTS.
A CUT ABOVE IN QUALITY.
CV-100 Carpet-Vinyl Cutting Machine
Designed to reduce operating cost and increase profits.
Our most popular machine, the CV-100 Cutting Machine is designed for the distributor and retailer who has a need for cutting equipment but cannot justify a large investment.

It can unroll, measure, remove telescoping, re-roll (with or without a core), cut, wrap, and discharge rolls of carpet and vinyl. All cutting can be done off the floor and in a central location, which keeps products cleaner and opens up aisles for other inventory activity.

In many instances one person (with a lift truck) can frequently handle all warehouse functions. In addition you can provide your customers with faster, more accurate, and more efficient service.
This machine is very easy to operate and maintain. Unskilled personnel can learn to operate and maintain this machine within a few hours. Installation, training and freight (within the continental U.S.) are included in the purchase price.

The CV-100 is designed to reduce operating cost and increase profits by providing fast, dependable and accurate handling of carpet and vinyl. It is constructed of heavy duty, top quality materials and component parts. The base machine is equipped with a Manual Cutter Clamp and a Digital Measuring System.


Optional Equipment

1 - Mechanically Assisted Roll-Up allows the carpet to be re-rolled by moving a hand lever to start the re-roll process, instead of manually tucking the carpet around a core.

2 - Power Dump Load Side for discharging stock rolls off the machine after a cut is made. This is done simply by turning a switch.

3 - Power Dump Roll-Up Side for discharging cut rolls off the machine.

4 - Automatic Edge Sensor on the Load Side for telescope removal and for squaring cuts. (Highly Recommended for Cuts Over 50')

5 - Full Length Foot Cables on both sides for wrapping and taping rolls.

6 - 15' Capacity for cutting 15' wide carpet.

7 - Reverse Rolling for rolling remnants face out.

8 - Dual Preset Digital Meter allows the machine to slow down and stop precisely at a predetermined measurement. Measures in feet and hundredths. (available only on machines with variable speed drives)

9 - Powered Cutter Clamp allows the cutter clamp to be lowered with a switch instead of manually.

10 - Variable Speed allows slow to fast rolling instead of one set speed.

11 - Casters which allow the machine to be moved to different locations. Equipped with brakes to prevent movement.

12 - Spiral Wrapper Attachment for up to 36" stretch film, which travels along the roll-up side of the machine for wrapping cut rolls.

13 - 4' Manual Inspection Area for inspecting carpet and vinyl.

14 - 6' Power Inspection Area for inspecting carpet and vinyl.

15 - Face Up Vinyl Rolling for inspecting vinyl. Equipped with additional top measuring.

16 - 10' Gravity Table for manually loading stock rolls on the machine.

17 - 8' Gravity Table for manually loading stock rolls on the machine.

Specifications

STANDARD
VARIABLE
MACHINE SPEED 60 ft per minute 125 ft per minute
MOTORS
Load Side 1 HP 2 HP
Roll-Up 1 HP 1 1/2 HP
Cutter 1/3 HP
Load Dump 3/4 HP
Roll-Up Dump 1/2 HP
Edge Sensor 1/2 HP
ELECTRICAL
Motor-Protection Manual Motor Protectors with built-in overload and short circuit protection
Reversing Starters (Saves wear and tear on all components)
All wiring is inside steel conduit and according to National Electrical Codes
COUNTER

 

Digital LED counter with calibration for greatest accuracy, equipped with AC line filtration system to eliminate electrical interference on counter
ROLLERS
Load 6.625" diameter x 5/16" thick
Roll-Up 6.625" diameter x 3/16" thick
SHAFTS
Load 1 1/2" diameter
Roll-Up 1 1/4"diameter
CHAIN
Load #40
Roll-Up #40
Cutter #40
Dump #50
CUTTER

 

Cuts in both directions. Blade is never exposed, travels inside cutter clamp for safety

 

WEIGHT 2,500 to 3,000 lbs
POWER REQUIREMENT

 

 

230 volt AC, 1 phase, 20 amps
or
230 volt AC, 3 phase, 20 amps

 


Homepage ~ Company History ~ Contact Us ~ Equipment
Accessories ~ Customer Lists ~ Customer Testimonials ~

Email Us: info@olivermfg.com